|Product Data Sheet||Material Safety Data Sheet (bulk)||Material Safety Data Sheet (aerosol)|
This product is a non-flammable, ozone-safe, rapid drying, EPA SNAP approved, alternative safety solvent furnished in bulk or a convenient aerosol can. It contains no CFC’s or petroleum distillates and has a 36,200 volt dielectric strength (ASTM D-877).
It has a powerful flushing action that penetrates and removes grease, grime, dirt, tar, wax and other contaminants from electrical equipment and motors, while energized.
- Fast drying
- Powerful cleaning action
- Leaves absolutely no residue
For use by:
For use on:
Key Physical Characteristics
|Physical Property||Typical Value|
|Boiling Point||188° F|
|Flash Point (TCC)||None|
|Odor||Slight solvent odor|
|Solubility in Water||Insoluble|
|Specific Gravity, (H20=1)||1.45|
|Vapor Density (Air=1)||Approx. 4.5|
|Vapor Pressure||59 mm Hg @ 20°C|
|VOC Content||1450 grams/liter|
Safety and Handling Precautions
Good ventilation is a must. Use self-contained, breathing apparatus if above TLV. Solvent resistant gloves and safety glasses, with splash protection, are required. All used and unused product should be disposed of in conformance with local, state and federal regulations. Keep out of reach of children. Treat this chemical with respect and follow all MSDS instructions.
|Product Name||Part No.Packaging||Packaging|
|PHASE II||1290-55||55 Gal. Drum|
|PHASE II||1290-5||5 Gal. Pail|
|PHASE II||1290-4||4 x 1 Gal. Case|