Spray and Wipe Cleaner/Degreaser
|Product Data Sheet||Material Safety Data Sheet|
This water based cleaner and degreaser removes grease, oils, wax, carbons and inks from virtually any surface. Convenient spray and wipe blend requires no mixing or rinsing. Use on equipment, fixtures, walls, floors and any other surface not harmed by water. It is residue free.
S-34 contains a sophisticated rust and corrosion inhibitor package, making it an ideal cleaner for unpainted metal surfaces.
- Safe to use
- Leaves no residue
- Ideal for metal surfaces
Simply spray on and allow a few minutes contact time for penetration. Rinse or wipe clean. Agitation with a soft brush or rag may be required in severe situations.
May also be used in diluted form as follows:
|Degreasing of equipment||1 to 15 parts water|
|Machinery & dies||1 to 10 parts water|
|Hot tank dip (100°F)||1 to 15 parts water|
|Spray cleaning||1 to 8 parts water|
|Air conditioning filters||1 to 4 parts water|
|Aircraft & diesel carbon tracks||1 to 3 parts water|
Hot water, when available, will speed cleaning.
Key Physical Characteristics
|Physical Property||Typical Value|
|Flash Point (TCC)||None|
|VOC Content||25 grams/liter|
(N/A = Not Applicable N/E = Not Established)
Safety and Handling Precautions
Maintain adequate ventilation. Rubber or plastic gloves are recommended. Safety glasses are recommended. Wash hands after use. Keep out of reach of children. Store in a cool dry area. Keep from freezing. See MSDS and label before use.
|Product Name||Part No.||Packaging|
|S-34||077-55||55 Gal. Drum|
|S-34||077-5||5 Gal. Pail|
|S-34||077-1||4 x 1 Gal. Case|
|S-34||077-12||12 x 1 Qt. Case|