THC extraction is a process where the THC component of the cannabis plant is extracted to be used in the production of various THC products. While products such as butane or alcohol are sometimes used in this process, you can also use acetone for THC extraction. Like other methods of extraction where a solvent is used to extract THC, you simply soak the cannabis plant in acetone, run the liquid through a coffee strainer, and then allow the acetone to evaporate. The resin that is left behind is THC and should sit for 24 hours after extraction before use. Once the acetone is evaporated, and the byproduct has sat for 24 hours, the THC can now be used as is, or in the production of other THC products.
Why Acetone is a Good Solvent for Extraction
- Acetone is a naturally occurring, organic, non-toxic solvent that in small amounts is actually not poisonous if consumed. If you are extracting THC to produce products that will be consumed or inhaled, an organic, non-toxic solvent like acetone is a great option for extraction.
- Acetone evaporates very quickly and has a low boiling point. So whether you purge your solvent in open air through evaporation, or use a hot plate to boil the liquid out, acetone can be used in either adaptation, and get the job done fast.
- In addition to being organic, non-toxic, and having the ability to purge quickly, acetone is also a very cost effective solvent. Acetone is simply cheaper than butane and other solvents traditionally used in extraction, making acetone a no brainer if you are trying to decide what solvent to use.
Looking for Acetone for THC Extraction?
Not only can you use acetone for THC extraction, but it is organic, fast acting, and a cheaper alternative to butane. If you are considering using acetone for extraction, speak to our chemical experts. Ecolink produces eco friendly chemicals and solvents, like acetone, for commercial use. Contact us today to learn more about acetone, and see if it is the right solvent for you.
Ecolink Team
