Why Use a Degreaser to Remove Moisture From Cleaning Operations?

/in /by

When it comes to commercial and industrial degreasing applications, moisture can be both a benefit and a drawback. Some applications, such as the cleaning of glass of high-grade plastics, can benefit from moisture condensing on the surface of the material to create wetness. However, for metal parts that are sensitive to moisture-induced oxidation, applying a degreaser to remove moisture is typically an essential requirement for the degreasing application.

How Oxidation Occurs
More commonly known as “rust”, oxide can create major problems in mechanical components that go unnoticed until it is too late to repair them economically. This is often because, when moisture is consistently present in the degreaser solution, it invades the tight spaces between components and essentially causes them to oxidize from the inside out. Initially, oxide presents on the surface, but it can affect the internal microstructure of metal if it is left unaddressed.

The stable layer of oxide that forms on the surface can be removed, but doing so is likely to be time consuming and expensive, and often requires the help of a heat treating company that specializes in metal finishing procedures, such as electropolishing. With that said, replacing rusted components is often as cost prohibitive as repairing them. Consequently, the best option is to use a non-moisture degreaser that removes moisture from the degreasing process.

Choosing the Right Product
The type of moisture-free degreaser you need ultimately depends on the application for which you need it. For example, if you need to clean sensitive electrical components with an open air spraying application, selecting a degreaser that has a dielectric formulation would be a smart choice. If you need to clean metal parts using a parts washing system, using a degreaser that has a fast drying, vaporous cleaning action would be a good choice for many alloys, especially ones that have a low degree of the chemical element chromium, and thus oxidize rather easily.

Need Help With Product Selection?
Unless you have experience in choosing a degreaser to remove moisture from cleaning operations, contact a degreaser supplier that does, such as Ecolink. We have non-moisture and low-moisture degreasers that are suitable for a wide array of degreasing applications, from cleaning aluminium and copper engine parts, to cleaning carbon steel work tools, to cleaning stainless steel kitchen surfaces. Whatever you need in a degreaser, we can supply it.

If we do not carry a pre-formulated product that meets your moisture-free degreasing needs, our talented team of chemists will create a product that is formulated for your specific requirements. If you need a custom solution for using a degreaser to remove moisture, we can formulate the right type of product and supply it to your company on a regular basis for as long as needed.

For technical information about using a degreaser to remove moisture, or to inquire about receiving a custom formulated degreaser, call us today at (800) 563-1305, or fill out the contact form on our website. We look forward to helping you meet your moisture-free degreasing needs!

Custom Cleaning Solutions for Industrial Parts

/in , , /by

cleaning industrial partsIf you business is a purveyor or supplier of industrial parts, then you no doubt have to rely on cleaning solutions for your parts. Some parts require only basic and general cleaning solutions, while other parts force the supplying agency to find a company that can tailor their operations to provide custom cleaning solutions. Finding a company that provides specialized cleaning solutions can be quite difficult, especially if the blending of chemical solutions is needed. The idea of custom chemical blending might already be apparent, but it is the use of multiple cleaning solutions to clean and degrease an industrial part, metal, or material. If this sounds like a tricky solution to provide, that is because it can be very complex. If your business has industrial parts that need cleaning solvents that pertain to specialized chemical blending, it is of extreme importance that you find the right company to perform the job.

A quick and easy answer to a question relevant to the finding of a company that can provide custom cleaning solutions for industrial parts would involve Ecolink. When needing cleaning solutions for your industrial parts, especially if it will involve specialized chemical blending, Ecolink is the leading authority on this type of service. If you do your research on the companies that can provide this type of tailored service, you will notice that Ecolink has the technology, experience, and overall capability to perform this kind of custom cleaner blending with absolute success. When researching Ecolink, you will come to find the company boasts impressive chemical industry sector expertise, as Ecolink has more than twenty-five years of custom cleaning implementation services under its belt, catering to manufacturing companies, aerospace, military, high-tech businesses, and other industries where critical cleaning processes is the norm.

Another advantage to bringing your needs for cleaning and degreasing of industrial parts to Ecolink is the chemical and technical consulting you will receive, available to all clients free of charge. Need help, assistance or expert opinion on how to use less or safer cleaning solvents, or what type of custom cleaning service will be needed for your industrial parts? Ecolink will lend its expert advice to any questions, concerns, or observations you have regarding the industry.

Why wait any longer to contact Ecolink? The company clearly offers superior advantages over competing companies regarding the services offered when you become a valued customer. Ecolink always serves the best interests concerning their clients, as well as the environment. If we can help you with custom cleaning solutions, chemical blending, or transitioning to a safer industrial cleaning and degreasing solvent, then it becomes our immediate priority. Ecolink is the best source for custom cleaning solutions for industrial parts – simply call them to find out why.

What is an Industrial Aqueous Parts Cleaning Solvent?

/in , /by

When operating in the workshop of an industrial organization, several different kinds of labor are performed, which mostly involve the use of industrial components that include parts, metals, materials, chemical solutions, oils, gas, and many other products. Most often, an industrial organization will need to clean the workshop in order to rid the area of potential contaminants that could harm or negatively affect the next operation, the workers laboring in the workshop, or even the environment. This is why industrial parts cleaners are important to industrial businesses, as they rely on a strong and efficient cleaning mechanism or component to ensure the complete cleansing of a location. One of the reliable types of cleaning is called industrial aqueous parts cleaning. This blog is dedicated to explaining how this industrial parts cleaning option functions.

When the cleaning needs to be done on site, many industrial businesses will employ the use of an aqueous industrial parts cleaner. Aqueous and semi-aqueous agents incorporate the emulsion of solvents and water – a cleaning solution – that effectively cleans a Ecolink1workstation. Aqueous cleaners are usually a combination of various substances, including alkaline builders, surfactants, sequestering agents, and other amalgamations. As it pertains to ferrous metal cleaning, rust inhibitors are built into the aqueous cleaner to prevent “flash rusting” after washing. The use of aqueous industrial parts cleaners are on the rise as its results have proven, in most cases, to be as effective or even better than hydrocarbon cleaners. In addition, the waste generated from using aqueous industrial parts cleaners are less hazardous, subsequently resulting in less costly disposal.

Aqueous industrial parts cleaners have advantages pertaining to particle and polar contaminants, and the cleaning solution only requires higher inputs of mechanical and thermal energy to be effective. Whereas, certain other solvents more easily remove oils and greases, but have health and environmental risks. In addition, most other industrial parts cleaning solvents are flammable, and consequently lead to a higher chance of fire and explosive hazards. Today, with the proper industrial parts washer equipment, it is generally accepted that aqueous industrial parts cleaners remove oil and grease as easily as solvents.

Ecolink1The above information is only the tip of the iceberg concerning what industrial companies need to know about aqueous industrial parts cleaners. It is highly recommended that you conduct your own research, and contact an authority on the topic, such as Ecolink. Ecolink has been working with industrial organizations to find the most efficient industrial parts cleaning solutions that are also eco friendly and provide a green alternative to harmful chemicals found in older parts cleaning solvents. An Ecolink representative will be happy to provide further information on aqueous industrial parts cleaners, and help examine whether this is the right industrial parts cleaning solution for your business.

Industrial Parts Washer Solvents – Why Use Environmentally Preferred or All Natural Solutions?

/in /by

Industrial parts washer solvents are important to manufacturing operations because they eliminate contaminants such as grease or dirt from components and machinery. Washers used for these processes come in a variety of forms including vapor degreasers, cold cleaning units, and conveyer driven equipment. Several cleaning solutions may be used to accomplish washing or degreasing processes. Industrial parts washer solvents can be petroleum-based, water-based, or organic in nature. A chosen cleaning solution greatly depends on the type of equipment being used along with the contaminants to be removed and the surface or part to be treated. Synthetic solvents create an excessive amount of waste that must be disposed of according to specified regulations. Government guidelines require all hazardous waste including liquids, filters, rags, and generated sludge to be managed by a specialized disposal company. Natural organic solvents offer a number of benefits because they produce less waste, decrease operational costs, and are eco-friendly.

Decrease Costs and Pollution by Eliminating Waste

Non-hazardous waste generated from aqueous solutions or organic solvents consisting of all natural materials can be discharged into the local sewer system as these by-products do not remain in the soil or water for an extended period of time. You must check the handling instructions on a product to make certain it is biodegradable prior to disposal. It is not always possible to use a completely non-hazardous solution in a washer; however, you can select the least harmful industrial parts washer solvents for facility use. The easiest way to determine the best option is to check the Material Safety Data Sheet (MSDS) before purchasing, choose a higher flash point solution, and substitute aqueous or low VOC (Volatile Organic Compound) cleaners when possible. An abundance of products are available to decrease generated waste, reduce emitted fumes, and create a safer working environment. Depending on the type of application, a non-flammable, low VOC aerosol or hand wipe solvent could be enough to do the trick.

Industrial parts washer solvents are purchasable for vapor degreasing or precision cleaning of surfaces with effective, less harmful materials. Specific products are designed for application to substrates such as metal, plastic, or electronic components. It is essential to make certain the selected product meets the precise removal needs of your company. Environmentally preferred solvents have low VOCs, excellent solvency, meet Environmental Protection Agency (EPA) guidelines, have little to no odor, do not leave residue, and offer less harmful evaporative qualities. If you have been seeking a greener alternative to harsh chemicals used for cleaning or degreasing, a variety of products have been made available to work with parts washers. Contact a manufacturer to learn more about what options best suit your specific industrial parts washer solvent needs and then make a choice based on what will provide desired results with the least harm to the environment or workers. Harsh chemicals are not the only answer to your cleaning needs as many alternatives are just as effective and do not generate harmful wastes.

Industrial parts washer solvents are necessary in a number of industries for contaminant removal processes. For more information about environmentally friendly, low VOC products, please call (800) 886-8240 or email info@ecolink.com.