Boiler Guard- 55 gallon

Ecolink requires a $600 minimum order. MOQs may apply to some items. Learn how to buy with Ecolink.

In stock

SKU: 5005-55 Category: Water Treatment

Boiler Guard- 55 gallon

Boiler Guard is a scale and corrosion inhibitor and oxygen scavenger specially made for steam boilers.

$ 1,055.00

Description

Boiler Guard - 55 Gallon Drum

Boiler Guard is a brown, alkaline solution whose principal ingredients are sodium hydroxide (10%-15% by concentration) and diethyl ethanolamine (1%-2% by concentration). It can be used to eliminate scale buildup and corrosion on steam boiler systems, as well as prevent these issues from occurring in the future. It is also an oxygen scavenger that binds free oxygen to hinder further scale and corrosion from developing.

Boiler Guard Benefits:

Nonflammable
Low reactivity
Can be used with a variety of boiler sizes

Boiler Guard Applications:

Boiler Guard is a water treatment solution that removes scale and corrosion from steam boilers and hampers their prospective formation.
Before use, Boiler Guard should be diluted to a rate of 8-16 ounces of solution per 500 gallons of water.
It should be administered using a by-pass feeder or pump on the high-pressure side of the boiler feed pump.
The HEDP levels of the system should be kept between 2 and 6 ppm, and total alkalinity should be maintained between 450 and 650.

Request Safety Data Sheet

GOT QUESTIONS?

FAQ

What is the CAS-no. and formula of Boiler Guard?

Boiler Guard is a formulated mixture and does not have a single chemical formula. It contains sodium hydroxide (CAS No. 1310-73-2) and diethyl ethanolamine (CAS No. 100-37-8) as its primary components.

What are the synonyms, physical, and chemical properties of Boiler Guard?

Boiler Guard is a brown to dark red, clear liquid with a mild odor. It is highly alkaline, with a pH typically between 13 and 14 when diluted, slightly viscous, non-flammable, and completely soluble in water. The product is designed to control scale, corrosion, and free oxygen in boiler feed water systems.

What safety precautions should be taken when handling Boiler Guard?

Avoid contact with eyes, skin, and clothing. Do not breathe fumes, mists, vapors, or sprays. Wear protective gloves, protective clothing, and eye or face protection when handling. Do not eat, drink, or smoke while using the product. Do not induce vomiting if swallowed and seek immediate medical attention. Wash thoroughly after handling and keep the product in its original container.

What are the appropriate engineering controls for Boiler Guard?

Provide adequate general ventilation to minimize exposure to mists or vapors. Use local exhaust ventilation where airborne concentrations may occur. Maintain exposure below applicable occupational limits and ensure emergency eyewash stations and safety showers are available in areas where the product is handled.