You may know that SAFE STRIP is used as a paint remover, but did you know that SAFE STRIP can be used as an adhesive remover too?
Look no further, SAFE STRIP is now available!
This new, environmentally preferred paint and coating remover is an easy-to-use, one step, safe stripper. It has a very slow evaporation that does not sacrifice performance and a unique gel formulation that can be brushed onto vertical and overhead surfaces. It is thin enough to spray on and thick enough to stay on, while providing maximum safety and improved performance for all industrial maintenance applications.
Uses for SAFE STRIP
SAFE STRIP G effectively removes a variety of paints including high gloss alkyl enamel, varnish, acrylic latex and polyurethane. It effectively replaces methylene chloride, toluene, benzene and other hazardous solvents traditionally used for paint clean up and paint removal.
SAFE STRIP G also removes industrial adhesives, clearkote, gaskets, and seals. It effectively replaces gasket and adhesive solvents that contain 1,1,1 trichloroethane, methylene chloride, acetone or toluene.
Benefits of Using SAFE STRIP
SAFE STRIP G has a much lower Inhalation Hazard Index than Methyl Ethyl Ketone (MEK), which makes it a safer chemical to use in commercial and industrial applications. In addition, SAFE STRIP G has the following environmentally friendly characteristics and safety features:
- Low VOC emissions
How to Use SAFE STRIP
SAFE STRIP G’s slow evaporation eliminates multiple applications. You only need to apply it once, let it work for 10-15 minutes, then scrape or rinse away the softened coating. Effective on a variety of cured and uncured coatings, SAFE STRIP G may be used in an immersion tank or as a brush on, rinse off solvent. For safety precautions, refer to the Safety Data Sheet.