Exxon Isopar™ M – 55 Gallon Drum

Ecolink requires a $600 minimum order. MOQs may apply to some items. Learn how to buy with Ecolink.

In stock

SKU: E0558-55 Category: Commodities

Exxon Isopar™ M – 55 Gallon Drum

Exxon Isopar M (also called Isopar M Fluid) mainly used as a solvent to combined with hydrogen to produce low odor.

$ 1,054.57

Description

Exxon Isopar™ M - 55 Gallon Drum

Exxon Isopar™ M (also called Isopar™ M Fluid) mainly used as a solvent to combined with hydrogen to produce low odor. The major components of this particular chemical are alkanes, isoalkanes, and cycloalkanes. This product is primarily based from petroleum raw materials. Isopar™ M Fluid is used mostly as a solvent in a manufacturing process such as metal working, cleaning agents and more. Industries and professional consumers mainly use this product. An interesting fact about Isopar™ M Fluid is that it is not sold to the public for general consumer uses, although it can be found as an ingredient for some consumer products.

Exxon Isopar™ M Benefits

Odorless
Low aromatic content
Low acute and chronic toxicity
Low viscosity
Does not cause environmental effects
Globally available

Exxon Isopar™ M Applications

Isopar™ M Fluid should be used only with proper ventilation.
Used primarily in refinery chemicals.

Additional Information

Weight: 395 lbs
Dimensions: 25 x 25 x 26

Request Safety Data Sheet

GOT QUESTIONS?

FAQ

What is the CAS-no. and formula of Isopar™ M Fluid?

Isopar™ M Fluid has the CAS No. 64742-47-8. As a petroleum-derived isoparaffinic hydrocarbon, it does not have a single molecular formula.

What are the synonyms, physical, and chemical properties of Isopar™ M Fluid?

Isopar™ M Fluid is an isoparaffinic hydrocarbon derived from hydrotreated petroleum distillates. It is a clear, colorless liquid with a faint odor. The product has a high boiling range of approximately 441–489°F, a flash point of about 207°F, very low evaporation rate, low vapor pressure, negligible water solubility, and a kinematic viscosity of approximately 2.7 mm²/s.

What safety precautions should be taken when handling Isopar™ M Fluid?

Avoid ingestion and do not induce vomiting if swallowed, as the product may enter the airways. Avoid breathing vapors and avoid contact with eyes and skin. Wear protective gloves, eye protection, and appropriate protective clothing. Wash hands thoroughly after handling and store containers locked up in a well-ventilated area.

What are the appropriate engineering controls for Isopar™ M Fluid?

Ensure good general and local exhaust ventilation at the work station to keep airborne concentrations below recommended exposure limits. Ground and bond containers and equipment to prevent static discharge. Use explosion-proof equipment where flammable vapors may accumulate.