MIL-C-22750D EPOXY POLYAMIDE COATING – TYPE 1

Topcoat over MIL-PRF-23377J primer or MIL-DTL-53022 primer

A two-component epoxy polyamide topcoat for spray and brush application with a maximum VOC of 4.7 lbs./gallon (563 grams/liter).

MIL-C-22750D EPOXY POLYAMIDE COATING – TYPE 1

1.     Color:

Fed. Std 595 Colors 1XXXX

Fed. Std 595 Colors 2XXXX

Fed. Std. 595 Colors 3XXXX

2.     Volume Solids:

25.9 – 31.6% (For Gloss colors)

29.4 – 33.9% (For Semigloss colors)

        27.3 – 35.2% (For Flat colors)
3.     Solids by Weight:

32.6 – 40% (For Gloss colors)

36.1 – 44.6% (For Semigloss colors)

37.9 – 46% (For Flat colors)

4.    Viscosity:  40 KU minimum 1 hours after mixing

5.     DFT: 1.0 – 1.2 mils

6.     Theoretical Coverage @ 1 mil dft:  415 – 565 ft2/gallon (varies by color and gloss)

7.     Gloss @ 60º

 Fed. Std 595 Colors 1XXXX (80 minimum)

Fed. Std 595 Colors 2XXXX (15 – 30)

Fed. Std. 595 Colors 3XXXX (8 maximum)

8.     Dry Time

         Set to Touch:  1 hour max..

Dry Hard: 7 hours max.

Complete Cure:  7 days

9.     Pot Life: 8 hours maximum    


10.  
Mix Ratio

1:1 by volume

1 part Component A

1 part Component B

11.   VOC:  3.5 – 4.7 lbs/gallon (415 – 565 grams/liter) (varies by color and gloss)

12. Induction Time: 1 hour

Chance_Ecolink

 

 

Order as little as 4 gallons! Call Chance at 800 563-1305 x 101 or email Chance to buy or request a FREE quote.

 


 

APPLICATION

 

Steel:  Surface must be clean and free of grease, dirt, oil, rust and other contaminants that could interfere with proper adhesion.

Aluminum:  Surface must be clean and free of grease, dirt, oil, rust and other contaminants that could interfere with proper adhesion.

Galvanized and other metals:  Clean and remove surface contamination including oxidation.  .

 

Reduction:  Reduce with MIL-T-81772 Type 2 as required.

Conventional Spray:

Atomizing Pressure:  45 – 55 psi

Pot Fluid Pressure:  10 – 20 lbs.

Airless Spray:

Tip Size:  0.011 – 0.015” orifice

Atomizing Pressure:  1800 – 2200 psi

Clean-up:

Clean tools and equipment immediately after use with MEK, MAK or MIL-T-81772 Type 2 thinner.

Safety Precautions:

This product is intended for professional use in an industrial environment only.  Consult the Material Safety Data Sheet prior to application.

Products are warranted to meet its internal specifications and are of merchantable quality.  However, the purchaser is solely responsible for the suitability of the product for any particular application.  The purchaser should thoroughly test or qualify the product for serviceability, environmental compliance and health and safety factors prior to use. Further, our total liability is limited to the price of the product or replacement in kind.

Call Chance at 800 563-1305 or email Chance to buy or request a FREE quote.

MIL-DTL-11195G FAST DRY LUSTERLESS ENAMEL, TYPE 2

Qualified under MIL-DTL-11195G Type 2

 A single component, HAPS free, corroMIL-DTL-11195G Type 2sion inhibiting coating for use on ammunition.

 

 

 

 

 

1.     Color:

Fed Std. 35109

Fed Std. 36231

2.     Volume Solids: 55.5 +/- 1%

3.     Solids by Weight: 75.3 +./- 1%

4.    Viscosity:  70 KU max. (reduced)

5.     DFT: 1.0 – 1.5 mils

6.     Theoretical Coverage @ 1 mil dft: 890 ft2/gallon

7.     Gloss @ 60º:  2 – 8

8.     Dry Time

         Set to Touch:  6 minutes max.

Dry Hard: 12 minutes max..

9.     VOC:  3.5 lbs/gallon (420 grams/liter)

 

Buy as little as 4 gallons! Call Chance at 800 563-1305 x 101 or email Chance to buy or request a FREE quote. Chance_Ecolink

 

 

 

 

APPLICATION

Steel:  Surface must be clean and free of grease, dirt, oil, rust and other contaminants that could interfere with proper adhesion.  Pretreatment with TT-P-490E Type 1 or DOD-P-15328D Wash Primers will give the best adhesion and performance.  When blasting the surface a minimum of SSPC-SP6 is required for best performance.

Aluminum:  Clean with an appropriate cleaner to remove contamination from the substrate.  Pretreat the surface with a wash primer or other conversion coating.

Galvanized and other metals:  Clean and remove surface contamination including oxidation.  Treat with a wash primer to improve adhesion to the substrate.

Note:   Due to wide variations in substrates, surface preparation etc.  It is recommended that the customer check adhesion and compatibility.

Reduction:  Reduce 8 parts of enamel with 1 part of thinner A-A-3007 by volume.

Conventional Spray:

Atomizing Pressure:  45 – 55 psi

Pot Fluid Pressure:  10 – 15 lbs.

Airless Spray:

Tip Size:  0.015 – 0.021” orifice

Atomizing Pressure:  2200 psi minimum

Clean-up:

Clean tools and equipment immediately after use A-A-3007 thinner.

Safety Precautions:

This product is intended for professional use in an industrial environment only.  Consult the Material Safety Data Sheet prior to application.

Products are warranted to meet its internal specifications and are of merchantable quality.  However, the purchaser is solely responsible for the suitability of the product for any particular application.  The purchaser should thoroughly test or qualify the product for serviceability, environmental compliance and health and safety factors prior to use. Further, our total liability is limited to the price of the product or replacement in kind.

Call Chance at 800 563-1305 or email Chance to buy or request a FREE quote.

Ecolink Collaborates to Promote Hazardous Source Reduction Globally

Hazardous Waste Minimization

October 2011 marked the 20th anniversary of Ecolink’s sustainable operations. The company was founded in response to the Montreal Protocol and the ban of Class 1 Ozone Depleting Solvents and other toxic industrial chemicals. As we embark on our next 20 years of serving the need for less, safer and compliant chemicals, we enlisted the help of other like-minded organizations and individuals.

Tuesday, February 14, 2012 – Valentine’s Day officially kicked off the beginning of our next chapter. We have worked closely with American Marketing Association (AMA-Atlanta) in support of GA DECA a high school marketing program with more than 10,000 students participating. Last Friday, we successfully recruited three AMA collegiate members for new product launch internships that run through April 22nd – Earth Day.

I am pleased to introduce our 3 very talented interns – Chance Hood, Courtney Rivkind and Jackie Hooper. Each intern will promote two brand new distributed products through our alliance partners: Randolph Products, Nugentec and Hubbard Hall respectively. We will emphasize social media as the primary way of accelerating exposure and engagement of these new strategic relationships and their unique products mutually selected. Each intern has 8 digital profiles and 2 merchandise promotions to design, implement and integrate. The intern who accumulates a combined score of most page views, on-page social sharing and return-on-investment (leads generated, quotes, samples, sales) will earn an extra $1,000 + donate $100 to their favorite charity.

Chance_Ecolink

 Chance Hood is a 2nd year MBA student at Mercer University (Atlanta) expecting to graduate in May 2012. A 26 years old originally from Alabama, Chance graduated with a BBA in Marketing from The University of Montevallo in 2008. Chance has worked in restaurant/hospitality industry and as a licensed outside sales insurance agent before enrolling in Enterprise Rent a Car’s management trainee program where he worked for the largest stand-alone branch in region.  While in his MBA program at Mercer University, Chance has maintained a 4.0 GPA and completed a sales strategy internship with Silverpop.  Chance is tasked with promoting Ecolink’s entree into the world of mil-spec paints and coatings and working closely with the business development team at Randolph Products. How can Randolph Products reduce hazardous waste? By specializing as the largest produce of the smallest batches of paints, coatings and primers an by offering super low (4 gallon) minimum quantities for legacy mil-spec paints & coatings that typically require 20 gallon minimum order with a high % of unopened paint getting buried in landfills. (I’ve witnessed more than my share during 13 years of auditing facilities). 

Please visit Chance’s two product pages and Like, Tweet, Digg, Google +, etc. [especially if you are family, friend, Mercer alumni, professor, fellow student] and help Chance make the most of his internship at Ecolink and also earn an extra $1,000 + $100 for charity:

https://ecolink.com/info/mil-dtl-11195g-type-2/ 

https://ecolink.com/info/mil-c-22750d/

====================================================================================================

 

Courtney_EcolinkCourtney Rivkind is currently a junior in the Goizueta Business School at Emory University pursuing a Bachelor in Business Administration in Finance and Film Media Management. Born and raised in Miami, FL, Courtney created her own entertainment company, DJ Courtney Enterprises, in 2009 to provide entertainment and marketing services for the Atlanta area while also working regularly as a disc jockey at major clubs and student events. Through organizing and marketing events for over 2,000+ attendees, Courtney learned to not only market herself but help people succeed in fast paced environments. Not afraid to perform in front of large crowds, Courtney constantly uses her creative side to come up with new and fresh ideas to help promote events. Courtney is working in our high-tech market segments (Media Storage, Heads, Wafers, Semiconductors, Photovoltaic Cells (Solar Cells), Precision Optics, Printed Circuit Boards) alongside the technical sales staff at our California-based alliance partner, Nugentec, who offer custom solutions, packaging and MSDS authoring. How can Nugentec reduce hazardous waste?By reclaiming very expensive fluorinated solvents commonly used for oxygen cleaning, vapor degreasing and as heat transfer fluids. In addition, they have a very successful track record brokering surplus materials as part of an industrial material exchange program. Please visit Courtney’s two product pages and Like, Tweet, Digg, Google +, etc. [especially if you are family, friend, Emory alumni, professor, fellow student] and help Courtney make the most of her internship at Ecolink and also earn an extra $1,000 + $100 for charity:

====================================================================================================

 

 Jackie Hooper Jackie_Ecolinkis a senior marketing major at Georgia College & State University where she serves as the VP of membership for her collegiate American Marketing Association chapter. Enthusiastic about the environment and sustainability as well as marketing and social media, Jackie feels extremely privileged to be able to combine the two into a valuable experience! Jackie will represent Hubbard Hall, the oldest privately help chemical company in the US with more than 5,000 commodity chemicals and an additional 1,000 specialty aqueous solutions, corrosion inhibitors, conversion coating and wastewater treatment. Jackie will work closely with Hubbard Hall’s distributor program manager to increase market share in select geographic markets within US. How can Hubbard Hall reduce hazardous waste? With more than 160 years of knowledge of chemistry, manufacturing ‘and’ regulatory compliance, Hubbard Hall maintains an extensive knowledge base of  solved chemical-related problems. They also have tremendous technical bench strength for new product development.

Please visit Jackie’s two product pages and Like, Tweet, Digg, Google +, etc. [especially if you are family, friend, Georgia College & State University alumni, professor, fellow student] and help Jackie make the most of her internship at Ecolink and also earn an extra $1,000 + $100 for charity:

https://ecolink.com/info/low-voc-corrosion-protection-replaces-cosmoline-nitrites/

https://ecolink.com/info/hap-free-heavy-duty-industrial-paint-stripper/

 

Ecolink promotes LOW VOC degreasers during Western Turbine User Group

VOC compliant degreasers on display at Western Turbine User’s Group


Meet Ecolink’s president and chemist, John Roudebush, and learn about new VOC compliant parts washing solvents and hand wipe solvents during the 2011 WTUI Conference held in Palm Springs, CA at the Palm Springs Convention Center and newly renovated Renaissance Hotel (formerly the Wyndham) from March 20 – 23, 2011. The Conference is open to all member-companies of WTUI.

SCAQMD compliant parts washing solvents

VOC Compliant Parts Washing Solvents

ECOLINK 250-SS is a low VOC (22 gm/l) degreaser designed to replace P-D-680, Stoddard Solvent (also known as mineral spirits), and MIL-PRF-680 parts washer solvents. It is qualified to MIL-PRF-680C Type V. ECOLINK 250-SS is safe for use on ferrous and non-ferrous metals. ECOLINK 250-SS is strong enough to remove grease, fuel oil, carbon and organic resins yet safe on most painted surfaces.

Benefits

  • Excellent solvency for a wide range of soils
  • Controlled evaporation
  • Leaves no residue
  • Virtually no odor
  • Low VOC – meets stringent air quality standards and is certified to the South Coast Air Quality Clean Air Solvent Certification program.

Applications & Directions
Use undiluted. ECOLINK 250-SS works very well in a drum mounted parts washer or any immersion tank. (Not for use in high pressure enclosed cabinets.) You may also spray or wipe ECOLINK 250-SS on a surface to be cleaned. Oil, dirt and carbon will flow off surface. If additional cleaning is required, re-apply and agitate with rag or brush. To speed evaporation, use compressed air or wipe with a dry rag.

VOC Compliant Hand Wipe Solvents

Silwipe 25 provides the future of environmentally sound industrial maintenance to your workplace today. This low VOC formula make use of the latest innovations in solvent chemistry resulting in a high purity, no-residue, fast dry formula.

Use Silwipe 25 to clean metal, plastic, and composite surfaces. Unlike high VOC solvents such as MEK, citrus terpenes, and n-propyl bromide, Silwipe 25 is able to perform a variety of cleaning jobs without contributing to the formation of photochemical smog. Silwipe 25 is low in odor and particularly effective at removing silicone oil and grease contaminants.

Benefits

• Evaporate quickly

• Low toxicity

• No ozone depleting substances

• No halogenated solvents

• Leaves absolutely no residue

• Safe on all metals and other critical surfaces*

• Broad range of material compatibility

Applications & Directions

Silwipe 25 provides the future of environmentally sound industrial maintenance to your workplace today. This low VOC formula make use of the latest innovations in solvent chemistry resulting in a high purity, no-residue, fast dry formula.

Use Silwipe 25 to clean metal, plastic, and composite surfaces. Unlike high VOC solvents such as MEK, citrus terpenes, and n-propyl bromide, Silwipe 25 is able to perform a variety of cleaning jobs without contributing to the formation of photochemical smog. Silwipe 25 is low in odor and particularly effective at removing silicone oil and grease contaminants.
* We suggest that you always test critical surface compatibility or call us for tech support.



Cut Your Parts Washing Solvent Use, Disposal, and VOC’s

Immersion Cleaning Reduces Parts Cleaner Solvent usage & VOC’s

How to Cut your MIL PRF 680 Solvent Usage and VOC's by up to 90%

MIL PRF 680 Types II, IV and V – all compatible

Ecolink partners with Clarus Technologies for MIL PRF 680 Type II, IV, and V to promote the PCS-35 total immersion solvent-based parts washer to tackle your toughest job. The PCS-35 is easy to use with many automated features that save time and money. Simply load parts into the gridded basket, choose a cycle duration from the touch screen panel and walk away! A high degree of cleanliness is achieved in a shorter amount of time with no handling or scrubbing. The parts agitate through a jet stream of solvent under the fluid level, cleaning those hard to reach places.

Agitation reduces solvent for parts washer

Ready to buy a new Clarus parts washing system? Ecolink Inc. offers a 15% discount and FREE shipping for degreaser chemicals or industrial solvent to fill your new parts washing system.

Choose from numerous alternatives and make the switch from the following chemical manufacturers:

  • Chemtronics

  • Petroferm Inc.

  • CRC Industries

  • Safety Kleen

  • Inland Technologies

  • ZEP

  • LPS Laboratories

 

Call 800 886-8240 or email info@ecolink.com to discuss your current use of any of these or other manufacturer’s brand to switch and start saving. With over 200 products to choose from, including several new formulations not yet listed on the website, we feel certain we can expand upon the savings and safety improvements enjoyed for nearly 20 years. Chemist owned and operated, we offer guaranteed FREE samples, including FREE freight, to evaluate for a RISK-FREE evaluation.