Definition of Rough & Tough Cleaner
Rough & Tough Cleaner is an alkaline, industrial-strength cleaning solution. Its primary ingredient is oligomeric D-glucopyranose (0.1%-1% by weight), and it is a caustic detergent that effectively removes carbon, grease, and other types of dirt and grime from off-road machineries such as dozers, scrapers, backhoes, and front-end loaders. Rough & Tough Cleaner can also be utilized as a pre-cleaning solution that cleanses and prepares surfaces prior to painting.
How to Use Rough & Tough Cleaner
Rough & Tough Cleaner is a highly concentrated solution, so it must be diluted to a ratio of 1:60 to 1:100 before use. It can then be used in a pump-up sprayer at a concentration of 1:1 or a post-pump chemical injector at a concentration of 1:4.
Before applying Rough & Tough Cleaner to an entire surface, spot test on a small area of the surface. After applying the Rough & Tough Cleaner, rinse the surface well, and do not allow it to dry on the surface. Finally, for best results, use this cleaner in conjunction with hot water or steam.
Rough & Tough Cleaner Warnings
There are a few important points that must be taken into consideration before using Rough & Tough Cleaner. First, it should not be used on aluminum, poly-sealed surfaces, automobiles, or over-the-road trucks. Second, it must be diluted to at least a 1:40 concentration before being applied to painted surfaces. And lastly, one should always refer to the Rough & Tough Cleaner’s Safety Data Sheet for full safety instructions.
Valuable Features of Rough & Tough Cleaner
Why use Rough & Tough Cleaner? It possesses useful qualities such as:
- Low instability
- Nonflammable
- Formulated for heavy-duty cleaning
- Available in two bulk sizes (5-gallon pails and 55-gallon drums)
- Can be used as both a cleaning solution and a pre-painting prep solution
Contact Tidal Washers Today
Rough & Tough Cleaner is just one of the many chemical solutions provided by Tidal Washers, a division of Ecolink, Inc. At Tidal Washers, we offer a wide variety of industrial cleaning products such as butyl degreasers, non-butyl degreasers, and house exterior cleaners. All of our products are formulated with environmentally friendly ingredients yet are powerful enough for commercial use. We also perform toll blending for those in need of customized solutions.
Interested in purchasing Rough & Tough Cleaner? Have questions about any of our product offerings? We would love to hear from you. Contact Tidal Washers today by emailing info@tidalwashers.com or calling 800-563-1305!
The Benefits of Rough & Tough Cleaner
/in Tidal Washers Product Blogs/by Industrial DegreasersDefinition of Rough & Tough Cleaner
Rough & Tough Cleaner is an alkaline, industrial-strength cleaning solution. Its primary ingredient is oligomeric D-glucopyranose (0.1%-1% by weight), and it is a caustic detergent that effectively removes carbon, grease, and other types of dirt and grime from off-road machineries such as dozers, scrapers, backhoes, and front-end loaders. Rough & Tough Cleaner can also be utilized as a pre-cleaning solution that cleanses and prepares surfaces prior to painting.
How to Use Rough & Tough Cleaner
Rough & Tough Cleaner is a highly concentrated solution, so it must be diluted to a ratio of 1:60 to 1:100 before use. It can then be used in a pump-up sprayer at a concentration of 1:1 or a post-pump chemical injector at a concentration of 1:4.
Before applying Rough & Tough Cleaner to an entire surface, spot test on a small area of the surface. After applying the Rough & Tough Cleaner, rinse the surface well, and do not allow it to dry on the surface. Finally, for best results, use this cleaner in conjunction with hot water or steam.
Rough & Tough Cleaner Warnings
There are a few important points that must be taken into consideration before using Rough & Tough Cleaner. First, it should not be used on aluminum, poly-sealed surfaces, automobiles, or over-the-road trucks. Second, it must be diluted to at least a 1:40 concentration before being applied to painted surfaces. And lastly, one should always refer to the Rough & Tough Cleaner’s Safety Data Sheet for full safety instructions.
Valuable Features of Rough & Tough Cleaner
Why use Rough & Tough Cleaner? It possesses useful qualities such as:
Contact Tidal Washers Today
Rough & Tough Cleaner is just one of the many chemical solutions provided by Tidal Washers, a division of Ecolink, Inc. At Tidal Washers, we offer a wide variety of industrial cleaning products such as butyl degreasers, non-butyl degreasers, and house exterior cleaners. All of our products are formulated with environmentally friendly ingredients yet are powerful enough for commercial use. We also perform toll blending for those in need of customized solutions.
Interested in purchasing Rough & Tough Cleaner? Have questions about any of our product offerings? We would love to hear from you. Contact Tidal Washers today by emailing info@tidalwashers.com or calling 800-563-1305!
The Benefits of Red Super Tracker
/in Tidal Washers Product Blogs/by Industrial DegreasersInterested in a New Industrial Cleaning Solution?
Red Super Tracker might just be the product for you. This red cleaning solution, primarily composed of lauryl dimethylamine oxide (10%-20% by weight), is a multipurpose product with three main applications. It acts as a general cleaning solution, as well as an odor masker, thanks to its pleasant apple scent. In addition, Red Super Tracker can be used as a marker during the soft washing process. Its red color fades over time, which informs the user when the surface being soft-washed should be rinsed.
Benefits of Red Super Tracker
Red Super Tracker offers a number of benefits to its users, such as:
Applying Red Super Tracker
To apply Red Super Tracker, simply follow these four easy steps:
Want to Purchase A General Cleaning Solution?
If so, check out Tidal Washers, one of Ecolink’s affiliate companies. Tidal Washers is a dependable provider of bleach additives (including Red Super Tracker), butyl degreasers, parts washer detergents, and many other industrial cleaning solutions. All of our solutions are available in bulk sizes, allowing you to go longer between shipments and saving you money over time. Additionally, much like Ecolink, Tidal Washers’ products employ eco-friendly ingredients, reducing your company’s impact on the environment.
If you have any questions about Red Super Tracker, or simply would like to learn more about our industrial chemical offerings, we would be happy to hear from you. Contact Tidal Washers today by filling out our contact form or calling 800-563-1305!
The Benefits of Red Fighter for Rust Stains
/in Tidal Washers Product Blogs/by Industrial DegreasersLooking for a Rust Stain Removal Product?
No matter whether they’re on a vehicle, building, or some other kind of surface, rust stains can be unsightly, reducing the aesthetic appeal of the object. Not to mention, they are sometimes difficult to remove, which can lead to wasted time and energy. Red Fighter is here to help! This industrial cleaning solution is comprised of a mixture of acids, mainly carbamic acid (20%-30% by weight) and hydrochloric acid (10%-20% by weight). It effectively expels not only rust stains, but also tire track stains, red mud stains, and other types of stains from brick and concrete surfaces.
Beneficial Properties of Red Fighter
Customers who use Red Fighter will enjoy the many benefits it has to offer, such as:
How to Use Red Fighter in 3 Easy Steps
Wondering how to use Red Fighter? Simply follow these three steps:
Don’t forget to read over Red Fighter’s Safety Data Sheet before use for important safety instructions.
Contact Tidal Washers for Your Rust Stains
Tidal Washers, a division of Ecolink, Inc., is your one-stop-shop for industrial cleaning solutions and solvents, such as Red Fighter.
Why buy from Tidal Washers?
If you are looking for industrial cleaning solutions, chances are, you use large quantities of chemicals on a regular basis. All of the Tidal Washers’ products are sold in convenient bulk sizes, cutting down on shipping costs and saving you money over time.
At Tidal Washers, we formulate our solutions with the environment in mind and emphasize the use of chemical ingredients that are safer for the planet.
Finally, our team of chemists is always happy to answer questions from customers. Whether you have an inquiry about an existing product or are interested in purchasing a customized solution, we are here to help you. Contact Tidal Washers today by calling 800-563-1305 or emailing info@tidalwashers.com!
The Benefits of Parts Metal Magic
/in Tidal Washers Product Blogs/by Industrial DegreasersInterested in a New Cleaning Powder for Your Spray Cabinet?
If so, Parts Metal Magic might just be the product for you. Parts Metal Magic is a cleaning powder that is primarily comprised of calcined soda, disodium oxosilanediolate, triphosphoric acid/sodium salt, sodium lauryl benzene sulfonate, and 2-butoxyethanol. It can be used to expel dirt, grease, and oil from aluminum, brass, and other types of metal. Parts Metal Magic is specifically formulated for use in high-pressure spray cabinets and hot vats.
Why Purchase Parts Metal Magic?
Parts Metal Magic is an excellent and effective cleaning powder thanks to its many valuable properties, which include:
How Do I Use Parts Metal Magic?
When utilizing Parts Metal Magic in conjunction with a high-pressure spray cabinet or a hot vat, the water in the cabinet or vat should be set to about 160ºF. Then, depending on the level of the soil of the metal parts to be cleaned, between 2 ounces and 8 ounces of Parts Metal Magic should be used for each gallon of water. Next, the machine’s agitator can be turned on to incorporate the powder into the water. The length of time that the metal parts should be left in the cabinet or vat will depend on two factors: the conditions of the water and the amount of soil on the metal.
What Safety Precautions Are Needed When Applying Parts Metal Magic?
Because Parts Metal Magic is an industrial-strength cleaning powder, it is important to refer to its Safety Data Sheet for detailed information on its potential hazards, what personal protective equipment is required while using it, and how to store it safely. Please read over the SDS before working with Parts Metal Magic for the first time.
Where Can I Find Tidal Washers Products?
Wondering where to buy Parts Metal Magic? It is one of the many products provided by Tidal Washers, a division of Ecolink, Inc. Tidal Washers offers a vast range of industrial, high-quality, eco-friendly chemical solutions, including concrete removers, brick cleaners, house exterior detergents, and more. Tidal Washers also manufactures custom chemicals for companies that require unique or highly specialized products.
Want to learn more about Parts Metal Magic or Tidal Washers’ other offerings? Please contact us today by filling out our contact form or calling 800-563-1305!
The Benefits of No-Bond Crete Release for Concrete Buildup
/in Tidal Washers Product Blogs/by Industrial DegreasersHow to Prevent Unwanted Concrete Buildup
Definition of No-Bond Crete Release
Those who work in industries that frequently utilize concrete know how inconvenient it can be when the concrete hardens against formwork, requiring a powerful cleaning agent to remove. In these cases, preventing the concrete from sticking to the formwork in the first place may be the best resolution.
If you are looking to inhibit concrete buildup, No-Bond Crete Release is the cleaning solution for you. This mineral-oil-based product (composed primarily of white mineral oils) helps to protect forms and form liners from concrete buildup, which makes them much simpler to clean after use. It also does not leave behind any discoloration or residue if applied correctly.
Applying No-Bond Crete Release to Remove Concrete
Before using No-Bond Crete Release, read over its Safety Data Sheet. This document contains pertinent information about how to properly use No-Bond Crete Release and the measures that must be taken if it comes into contact with skin or eyes. Although No-Bond Crete Release poses a low health risk (on the National Fire Protection Association scale of 0 to 4, it has a rating of 1), it is still important to follow all guidelines on using and storing the product safely.
No-Bond Crete Release is easy to apply! Simply use an atomizing or misting spray tip to spray a thin coating of the product onto forms or form liners prior to filling with concrete. Only a small amount of No-Bond Crete Release is required to work effectively; wipe up any excess product with a towel or squeegee.
Advantages of No-Bond Crete Release
Why use No-Bond Crete Release? It provides a number of excellent benefits:
Where to Purchase No-Bond Crete Release
If you are interested in buying No-Bond Crete Release, check out Tidal Washers. An affiliate of Ecolink, Inc., Tidal Washers is a trusted supplier of No-Bond Crete Release and a variety of other industrial-strength chemical solutions, such as kitchen cleaners, house exterior cleaners, parts washer detergents, and much more. All of the Tidal Washers’ products are formulated to be efficacious, eco-friendly, and cost-effective. Thus, when you purchase from Tidal Washers, you are not only benefitting your bottom line but the environment too!
Do you have questions about No-Bond Crete Release or any of Tidal Washers’ other products? Please contact us by calling 800-563-1305 or filling out our contact form!