Definition of Rough & Tough Cleaner
Rough & Tough Cleaner is an alkaline, industrial-strength cleaning solution. Its primary ingredient is oligomeric D-glucopyranose (0.1%-1% by weight), and it is a caustic detergent that effectively removes carbon, grease, and other types of dirt and grime from off-road machineries such as dozers, scrapers, backhoes, and front-end loaders. Rough & Tough Cleaner can also be utilized as a pre-cleaning solution that cleanses and prepares surfaces prior to painting.
How to Use Rough & Tough Cleaner
Rough & Tough Cleaner is a highly concentrated solution, so it must be diluted to a ratio of 1:60 to 1:100 before use. It can then be used in a pump-up sprayer at a concentration of 1:1 or a post-pump chemical injector at a concentration of 1:4.
Before applying Rough & Tough Cleaner to an entire surface, spot test on a small area of the surface. After applying the Rough & Tough Cleaner, rinse the surface well, and do not allow it to dry on the surface. Finally, for best results, use this cleaner in conjunction with hot water or steam.
Rough & Tough Cleaner Warnings
There are a few important points that must be taken into consideration before using Rough & Tough Cleaner. First, it should not be used on aluminum, poly-sealed surfaces, automobiles, or over-the-road trucks. Second, it must be diluted to at least a 1:40 concentration before being applied to painted surfaces. And lastly, one should always refer to the Rough & Tough Cleaner’s Safety Data Sheet for full safety instructions.
Valuable Features of Rough & Tough Cleaner
Why use Rough & Tough Cleaner? It possesses useful qualities such as:
- Low instability
- Nonflammable
- Formulated for heavy-duty cleaning
- Available in two bulk sizes (5-gallon pails and 55-gallon drums)
- Can be used as both a cleaning solution and a pre-painting prep solution
Contact Tidal Washers Today
Rough & Tough Cleaner is just one of the many chemical solutions provided by Tidal Washers, a division of Ecolink, Inc. At Tidal Washers, we offer a wide variety of industrial cleaning products such as butyl degreasers, non-butyl degreasers, and house exterior cleaners. All of our products are formulated with environmentally friendly ingredients yet are powerful enough for commercial use. We also perform toll blending for those in need of customized solutions.
Interested in purchasing Rough & Tough Cleaner? Have questions about any of our product offerings? We would love to hear from you. Contact Tidal Washers today by emailing info@tidalwashers.com or calling 800-563-1305!
The Benefits of Tidal Aluma Shine
/in Tidal Washers Product Blogs/by Industrial DegreasersAre You Looking to Improve the Shine of an Aluminum Surface?
If so, Tidal Aluma Shine is the perfect product for you. Primarily composed of sulfuric acid, hydrofluoric acid, ethoxylated nonylphenol, xylene sulfonic acid sodium salt, and ethoxylated alcohol phosphate, this acidic cleaning solution will polish unpainted aluminum surfaces and leave them looking bright and shiny. It can also improve the sheen and overall appearance of anodized or mirror-polished aluminum that has been damaged.
Advantages of Tidal Aluma Shine
Wondering why you should buy Tidal Aluma Shine, rather than a different aluminum polishing product? Tidal Aluma Shine offers the following advantages:
How to Use Tidal Aluma Shine in 4 Simple Steps
Although Tidal Aluma Shine is an industrial-strength solution, it is straightforward to use:
It is important to note that Tidal Aluma Shine should not be used on painted surfaces, glass, pumping systems, or heating coils.
Where to Purchase Tidal Aluma Shine
Now that you have learned about Tidal Aluma Shine’s benefits and applications, are you interested in purchasing it? Tidal Aluma Shine is offered by Tidal Washers, one of Ecolink’s affiliates. Tidal Washers is a trusted supplier of aluminum brighteners like Tidal Aluma Shine, as well as concrete removers, house exterior cleaners, parts washer detergents, and much more. These products are formulated with eco-friendly ingredients to reduce your company’s impact on the environment!
To speak with one of the Tidal Washers’ chemical experts about our offerings and discover which products are best for your needs, simply fill out our contact form or call 800-563-1305 today!
The Benefits of Super Soy Asphalt Releaser
/in Tidal Washers Product Blogs/by Industrial DegreasersLooking for an Asphalt Release Product?
If you work in an industry that regularly uses asphalt, you know how difficult it can be to prevent it from sticking to every surface in your work area. It is also challenging to remove it from these surfaces, which ultimately leads to wasted time and effort. That’s where Super Soy Asphalt Releaser comes in! This solution, whose main ingredient is methyl ester from soybean oil (90%-100% by weight), forms a barrier between asphalt and metal surfaces, such as trucks and asphalt handling equipment. Its anti-stick ingredients inhibit asphalt from adhering to these surfaces.
3 Easy Steps to Apply Super Soy Asphalt Releaser
Applying Super Soy Asphalt Releaser is super simple! Just follow these three steps:
Why Purchase Super Soy Asphalt Releaser?
Super Soy Asphalt Releaser provides its users with many benefits, including:
Where Can I Find Tidal Washer’s Products?
Super Soy Asphalt Releaser can be purchased from Tidal Washers, an affiliate of Ecolink, Inc. Tidal Washers offers a wide range of industrial cleaning solutions and solvents. Why work with Tidal Washers?
Tidal Washers prioritizes the use of eco-friendly ingredients in all of our chemical solutions. If your company has been looking to implement a greener model, this is an excellent reason to purchase from Tidal Washers.
At Tidal Washers, we don’t only sell asphalt release products like Super Soy Asphalt Releaser; we also provide kitchen detergents, butyl and non-butyl degreasers, masonry cleaning solutions, and much more.
And if none of our pre-made products fit your needs, no worries! The chemists at Tidal Washers are also able to make customized solutions. We will work with you to create the perfect solution for your needs.
Want to learn more about Tidal Washers’ product offerings? Have any questions? Please contact us by calling 800-563-1305 or filling out our contact form. We look forward to helping you!
The Benefits of Rough & Tough Cleaner
/in Tidal Washers Product Blogs/by Industrial DegreasersDefinition of Rough & Tough Cleaner
Rough & Tough Cleaner is an alkaline, industrial-strength cleaning solution. Its primary ingredient is oligomeric D-glucopyranose (0.1%-1% by weight), and it is a caustic detergent that effectively removes carbon, grease, and other types of dirt and grime from off-road machineries such as dozers, scrapers, backhoes, and front-end loaders. Rough & Tough Cleaner can also be utilized as a pre-cleaning solution that cleanses and prepares surfaces prior to painting.
How to Use Rough & Tough Cleaner
Rough & Tough Cleaner is a highly concentrated solution, so it must be diluted to a ratio of 1:60 to 1:100 before use. It can then be used in a pump-up sprayer at a concentration of 1:1 or a post-pump chemical injector at a concentration of 1:4.
Before applying Rough & Tough Cleaner to an entire surface, spot test on a small area of the surface. After applying the Rough & Tough Cleaner, rinse the surface well, and do not allow it to dry on the surface. Finally, for best results, use this cleaner in conjunction with hot water or steam.
Rough & Tough Cleaner Warnings
There are a few important points that must be taken into consideration before using Rough & Tough Cleaner. First, it should not be used on aluminum, poly-sealed surfaces, automobiles, or over-the-road trucks. Second, it must be diluted to at least a 1:40 concentration before being applied to painted surfaces. And lastly, one should always refer to the Rough & Tough Cleaner’s Safety Data Sheet for full safety instructions.
Valuable Features of Rough & Tough Cleaner
Why use Rough & Tough Cleaner? It possesses useful qualities such as:
Contact Tidal Washers Today
Rough & Tough Cleaner is just one of the many chemical solutions provided by Tidal Washers, a division of Ecolink, Inc. At Tidal Washers, we offer a wide variety of industrial cleaning products such as butyl degreasers, non-butyl degreasers, and house exterior cleaners. All of our products are formulated with environmentally friendly ingredients yet are powerful enough for commercial use. We also perform toll blending for those in need of customized solutions.
Interested in purchasing Rough & Tough Cleaner? Have questions about any of our product offerings? We would love to hear from you. Contact Tidal Washers today by emailing info@tidalwashers.com or calling 800-563-1305!
The Benefits of Red Super Tracker
/in Tidal Washers Product Blogs/by Industrial DegreasersInterested in a New Industrial Cleaning Solution?
Red Super Tracker might just be the product for you. This red cleaning solution, primarily composed of lauryl dimethylamine oxide (10%-20% by weight), is a multipurpose product with three main applications. It acts as a general cleaning solution, as well as an odor masker, thanks to its pleasant apple scent. In addition, Red Super Tracker can be used as a marker during the soft washing process. Its red color fades over time, which informs the user when the surface being soft-washed should be rinsed.
Benefits of Red Super Tracker
Red Super Tracker offers a number of benefits to its users, such as:
Applying Red Super Tracker
To apply Red Super Tracker, simply follow these four easy steps:
Want to Purchase A General Cleaning Solution?
If so, check out Tidal Washers, one of Ecolink’s affiliate companies. Tidal Washers is a dependable provider of bleach additives (including Red Super Tracker), butyl degreasers, parts washer detergents, and many other industrial cleaning solutions. All of our solutions are available in bulk sizes, allowing you to go longer between shipments and saving you money over time. Additionally, much like Ecolink, Tidal Washers’ products employ eco-friendly ingredients, reducing your company’s impact on the environment.
If you have any questions about Red Super Tracker, or simply would like to learn more about our industrial chemical offerings, we would be happy to hear from you. Contact Tidal Washers today by filling out our contact form or calling 800-563-1305!
The Benefits of Red Fighter for Rust Stains
/in Tidal Washers Product Blogs/by Industrial DegreasersLooking for a Rust Stain Removal Product?
No matter whether they’re on a vehicle, building, or some other kind of surface, rust stains can be unsightly, reducing the aesthetic appeal of the object. Not to mention, they are sometimes difficult to remove, which can lead to wasted time and energy. Red Fighter is here to help! This industrial cleaning solution is comprised of a mixture of acids, mainly carbamic acid (20%-30% by weight) and hydrochloric acid (10%-20% by weight). It effectively expels not only rust stains, but also tire track stains, red mud stains, and other types of stains from brick and concrete surfaces.
Beneficial Properties of Red Fighter
Customers who use Red Fighter will enjoy the many benefits it has to offer, such as:
How to Use Red Fighter in 3 Easy Steps
Wondering how to use Red Fighter? Simply follow these three steps:
Don’t forget to read over Red Fighter’s Safety Data Sheet before use for important safety instructions.
Contact Tidal Washers for Your Rust Stains
Tidal Washers, a division of Ecolink, Inc., is your one-stop-shop for industrial cleaning solutions and solvents, such as Red Fighter.
Why buy from Tidal Washers?
If you are looking for industrial cleaning solutions, chances are, you use large quantities of chemicals on a regular basis. All of the Tidal Washers’ products are sold in convenient bulk sizes, cutting down on shipping costs and saving you money over time.
At Tidal Washers, we formulate our solutions with the environment in mind and emphasize the use of chemical ingredients that are safer for the planet.
Finally, our team of chemists is always happy to answer questions from customers. Whether you have an inquiry about an existing product or are interested in purchasing a customized solution, we are here to help you. Contact Tidal Washers today by calling 800-563-1305 or emailing info@tidalwashers.com!