Looking for a Deck Cleaning Solution? 

If you have been in the market for a new deck detergent, look no further! Tidal Max Deck Stripper is an alkaline, industrial-grade deck cleaning solution. Its primary ingredient is oligomeric D-glucopyranose (0.1%-1% by weight). This cleaner effectively expels dirt, grease, and oil from wooden and concrete decks. It also has the ability to strip unwanted paint and stain off of decks.  

Using Tidal Max Deck Stripper: 4 Easy Steps 

Tidal Max Deck Stripper is easy to use! Just follow these 4 simple steps: 

1. Depending on what you are using Tidal Max Deck Stripper for, it may or may not require dilution. For general deck cleaning, Tidal Max Deck Stripper should be diluted to a concentration between 1:2 and 1:4. However, when stripping paint or stain off of decks, it may be used without dilution.  
2. Before applying Tidal Max Deck Stripper, fully wet down the deck’s surface. Then, administer the deck stripper with a low-pressure appliance.  
3. Allow Tidal Max Deck Stripper to sit on the deck for 10 minutes.  
4. Rinse the deck stripper off of the deck using low pressure for wooden surfaces or high pressure for concrete surfaces.  

When stripping paint from a deck, Tidal Max Deck Stripper may need to be applied and rinsed off a second time. Additionally, Tidal Max Deck Stripper should not be allowed to dry before rinsing. It also should not be used on aluminum or paint that is meant to stay intact. Please refer to Tidal Max Deck Stripper’s Safety Data Sheet for further instructions on how to safely apply this product.   

Beneficial Traits of Tidal Max Deck Stripper  

Tidal Max Deck Stripper offers its users a number of beneficial traits, such as: 

• Low instability 
• Nonflammable 
• Sold in three convenient sizes  
• Can be used with hot water or cold water  

Where Can You Buy Tidal Max Deck Stripper?  

Tidal Max Deck Stripper is just one of the many products provided by Tidal Washers, one of Ecolink’s affiliates. In addition to Tidal Max Deck Stripper, Tidal Washers offers a wide variety of industrial cleaning solutions and solvents, such as kitchen cleaners, concrete removers, butyl degreasers, and non-butyl degreasers. Tidal Washers’ products are eco-friendly, efficacious, and affordable- all qualities that any good industrial cleaning solution should have.  

Whether you have additional questions or are ready to buy, please contact Tidal Washers by filling out our contact form or calling 800-563-1305!  

Definition of Tidal Graffiti Remover 

Looking to remove graffiti? Tidal Graffiti Remover is the perfect product system for you! It consists of two components: Component 1 is an acidic solution that primarily consists of a proprietary surfactant blend, 2-butoxyethanol, and methyl ester from soybean oil; and Component 2 is an alkaline solution that primarily consists of morpholine, caustic potash, and ethoxylated nonylphenol. These two components work together to expel spray-painted graffiti from a variety of indoor and outdoor surfaces.  

Features of Tidal Graffiti Remover  

• Self-neutralizing 
• Low flammability 
• Low instability 
• Can be applied to porous, non-porous, coated, and uncoated surfaces 
• Safe to use in wet, dry, hot, and cold environments 
• Sold in a 2×1-gallon kit and a 2×2.5-gallon kit  

Removing Graffiti with Tidal Graffiti Remover 

To remove graffiti with Tidal Graffiti Remover, first read over its Safety Data Sheet for pertinent safety information, such as the personal protective equipment that should be worn while working with this product and how the product should be handled and stored. Then, before applying Tidal Graffiti Remover to the desired surface, spot test both components on a small area of the surface.  

Apply Component 1 to the surface using a low-pressure pump-up sprayer or a brush. Component 2 should be administered in the same fashion as Component 1 immediately after the application of Component 1, unless cleaning an indoor or painted surface. Allow the two components to sit for 5-10 minutes. Then, use a high-pressure washer and hot water to rinse the surface. If cleaning an indoor surface, simply wipe the cleaning solutions off.  

Stubborn spray paint may necessitate a second or third application of Tidal Graffiti Remover. In these cases, administer both of the components for a second or third round following the instructions outlined above.  

Where to Find Graffiti Remover 

Now that you have learned about Tidal Graffiti Remover, some of its excellent features, and how to use it, you may be wondering where you can purchase it. Look no further than Tidal Washers, an affiliate of Ecolink, Inc. Tidal Washers is a trusted supplier of industrial chemical solutions and solvents, such as graffiti removal products (like Tidal Graffiti Remover), house exterior cleaners, concrete removers, parts washer detergents, and more. All of our products contain eco-friendly ingredients that are better not only for the environment but for those working with the chemicals as well.  

To contact Tidal Washers, please call 800-563-1305 or email info@tidalwashers.com today!