What Does a Vapor Degreaser do?

/in /by

vapor degreaserIn short, a vapor degreaser is a type of surface finishing process – a kind of industrial solution that works to alter the surface of a manufactured product or material in order to manipulate certain properties of the item – involving specific solvents that will work to clean the industrial parts so that they are ready for their intended operation. The solvent is in vapor form, hence the name “vapor degreaser.” The theory behind the process of vapor degreasing is that the solvents used in the makeup of the vapor degreaser will dissolve any and all potentially inhibiting particles and contaminants on the industrial products, and remove those operational inhibitors by dripping them from the industrial parts.

The steps taken to perform vapor degreasing are as follows:

  • The industrial company will set up a solvent basin that has been combined with a heating coil that will boil the solvent.
  • The solvent will then eventually evaporates, and the vapor produced will rise into the chamber that has been put in place to catch the vapor to where it affects the industrial component.
  • Essentially, the vaporized solvent will be in a closed space where the industrial component has been placed.
  • The condensed degreasing solvent will then adhere onto the industrial part, dissolving the dirt, grime, grease, and other contaminants found on the industrial part.
  • The impurities will eventually be contained within the liquid beads formed from the vapor, and the degreasing solvent will run down the industrial component and drip off.

Lately, many industrial businesses that offer vapor degreasing services have devised supplemental systems and methods to the vapor degreasing process that make it more economical, which involves capturing and reclaiming the degreasing solvent so that it can be used repeatedly. Other adaptations to enhance the vapor degreasing system have been made, including the use of several tanks to improve and speed up the rinsing of solvents, and the use of a degreasing solvent spray that coats the industrial part prior to entry into the chamber to loosen tougher contaminants that are attached to the industrial component, hasten the entire process, and to help more complex parts become clean.

Why use a vapor degrading process to clean industrial parts over other cleaning and degreasing processes? Probably the most important quality to vapor cleaning and degreasing methods is that vapor degreasing can be used on electronic items to remove non-water soluble particles because water that can disrupt or even break electronic devices is not used. As you know, most electronic devices are very fragile, and often quite expensive. The only safe method of cleaning these items is through vapor degreasing.

To learn more about how vapor degreasing may work to solve your industrial company’s cleaning and degreasing needs, contact Ecolink. Ecolink understands the process and the “how to” related to vapor degreasers, and can explain the process to your company to see if it is indeed the right fit for what you need for your industrial parts.

Industrial Degreasers that will Change the way you Think About Waste

/in , , /by

chemical wasteIndustrial degreasers and cleaning solutions are made up of an amalgamation of chemical compounds that can rid industrial products of dirt, rust, stains, and any type of particles that could inhibit the industrial components from working as intended. For some industrial businesses, the information stated in the previous sentence is as far as their knowledge extends concerning the industrial degreasers and cleaning solvents. When the process of cleaning industrial products with industrial degreasers is complete, there is always excess degreasing solvent remaining that needs to be disposed. So, what happens to this excess waste? Unfortunately, due to the ignorance of the harmful nature of some industrial degreasers and cleaning agents, the excess degreasing solvent is not properly disposed. In many cases, the excess waste is merely tossed out with other forms of trash, or even poured out somewhere outside. Sounds like the making for an environmental movie, or one you recently watched? Well, unfortunately the previously written statement rings true. However, it should be clear that most companies that engage in this type of waste removal do not realize how truly harmful and impactful it can be to the environment, because they do not understand the chemicals that go into making industrial degreasers. Some industrial degreasing liquids can destroy soil, grass, and trees, make water poisonous to aquatic life, and the gas and vapor emitted from the industrial degreasers weakens our already depleting ozone.

This is why environmentally conscious organizations such as Ecolink are working tirelessly to change the way industrial companies think about waste, as it pertains to industrial degreasers and cleaning solvents. One of the ways companies like Ecolink are battling this waste travesty is by educating industrial businesses on their industrial cleaning practices, which includes the discovering of whether their industrial degreasers have hazardous chemicals, and if so, how to make the transition away from toxic chemicals and towards eco friendly, green alternative cleaning solutions. Eco friendly, green alternative industrial degreasers can be disposed of in a much more simplified manner, without the worry of later ramifications. Ecolink strives to inform all industrial companies of harmful chemical compound cleaning solvents that are still in use, along with solvents where the use for cleaning purposes has been terminated by regulatory committees. If your industrial organization fall under either of those two categories, Ecolink will help your company transition to an eco friendly, green alternative industrial degreaser that will no only clean better than what you currently use, but will also be economically cheaper in the long run.

Ecolink specializes in chemical management. They have a unique team of individuals who will inventory your company’s current chemical supply and evaluate monthly usage and waste disposal costs.  Every company can benefit from evaluating their chemical cleaning needs since Ecolink can find chemical alternatives, or substitutions for your current products. Ecolink is confident that your business will save money either in the cost of chemicals being used or your waste disposal charges.

Please, do not wait for Ecolink to find you. If you have any concerns or reservations about the industrial degreasers your company use, please call Ecolink, and allow their professionals to assist you in the switch to a safer more cost effective alternatives.

What is Industrial Cleaning?

/in , /by

Industrial CleaningAlmost every industrial organization has a method of industrial cleaning in place to clean and remove dirt, grime, grease, stains, rust, and all other harmful particles from parts, metals, materials, and many other types of industrial components before those products are put into service. Industrial cleaning is a very important method of the industrial design, build, and supply process because almost all industrial products must be completely cleaned of hazardous particles, otherwise a particular product might not function as intended or needed, rendering an entire operation ineffective, just because of one piece. Therefore, industrial businesses must be sure they have a reliable source of cleaning and degreasing service in place in order to prevent any such negative or preventive affectation from happening.

Industrial cleaning usually involves a chemical solution, or solvent, which is made up of a chemical compound in liquid form that can be applied to the industrial products for cleaning purposes. Once the chemical cleaning and degreasing agent is applied to the product, after time, it should be completely free from any and all inhibiting agents. Chemical solutions are usually designed by chemists and scientists who understand the emulsion process of compounds, and what can be derived or extracted when combining two chemical components. This process will elicit a liquid cleaning and degreasing solution that will clean industrial components.

However, certain methods of chemical cleaning, especially the process of creating liquid cleaning and degreasing solutions, have come under fire by certain organizations, such as the EPA and OSHA, concerning the safety of many of the chemicals that are in use or serve as a primary ingredient in the solvents. It is true that many chemical compounds can be hazardous to the environment, as well as to those who come into contact with them or even come in close proximity to the gases and vapors the chemicals emit. That is why companies like Ecolink are exercising due diligence into the chemical compounds that are used for industrial cleaning, and offering eco friendly, green alternative cleaning and degreasing solutions that are as effective for removing harmful particles from industrial products.

Ecolink understands how important industrial cleaning is to the entire process of industrial designing and building, which is why the company strives to keep industrial cleaning and degreasing solutions an integral part to the process, but instead use chemical solvents that are safe for people and for the environment. Ecolink has discovered several solvents still in use that are deemed unsafe. However, Ecolink provides industrial businesses alternative solutions to the solvent currently in use, and will help the industrial organization make a seamless transition to the eco friendly, green alternative.

Contact Ecolink to find out if your industrial cleaning solution is indeed safe for use. If not, Ecolink professionals will provide new and improved industrial cleaning solvents from which you can choose, and help you make an easy switch.

AK-225 Phase out: Find a Safe Alternative Now

/in /by

replacing bad chemicalsFor those industrial businesses that are still using AK-225 to clean and degrease parts, metals, and materials, it may already be public knowledge that this cleaning and degreasing solvent, per federal regulatory demands, is being phased out, with the complete decommissioning of this solution set at the beginning of 2015. No matter how attached industrial businesses might have become to this effective, yet harmful cleaning and degreasing agent, it has been rendered hazardous by the powers that be and must be phased out. If your industrial business is facing the scenarios of having to replace the AK-225 cleaning and degreasing solution, then the time is now to find a safe alternative. Fortunately, Ecolink – a company that researches and designs green alternative, eco friendly cleaning and degreasing solutions – has found a safe alternative that industrial organizations can switch to right away and commence protecting its labor force and the environment.

The eco friendly, green alternative industrial solution that can replace AK-225, and even clean and degrease with more efficiency is called FluoSolv WS. FluoSolv WS is a non flammable and non toxic chemical cleaning and degreasing solution that has already become a replacement for older, hazardous cleaning and degreasing agents such as N-propyl Bromide, or nPB, and Trichloroethylene, also known as TCE. Now, FluoSolv WS is considered the best replacement solution for AK-225. This chemical solvent has a very high allowable exposure limit, making it a safe cleaning and degreasing agent for uses that include wipe and dip cleaners. FluoSolv WS provides outstanding solubility for fluorinated and hydrocarbon oils and grease. This solvent is compatible with almost any type of metals, glass, ceramics, and elastomers. Another important reason why FluoSolv WS is the chosen solution to replace AK-225 has to do with its zero ozone depleting potential – the opposite of what was wrong with using AK-225.

For more details and specifications regarding FluoSolv WS, you are encouraged to contact Ecolink. Ecolink professionals have conducted their due diligence on FluoSolv WS, and can assist any industrial agency needing to make a transition to an alternative cleaner and degreaser by providing an abundance of information on the solvent, or by helping with the transition to the new solution, or both. Ecolink is considered a valuable resource for replacing harmful cleaners and degreasers. They develop and create green cleaners and degreasers, as well as aiding in the transition from a harmful solvent to a safe solution.

Industrial organizations still using AK-225 should not delay any longer. Allow Ecolink to help you make the switch to a safe alternative now – the FluoSolv WS cleaning and degreasing solution. Once you make the change, you will be providing a safety service to your workforce and to the environment. Call 800-409-3142

Custom Blended Degreasers & Cleaning Agents

/in /by

If your company is a supplier or end user of industrial products, then you company likely relies heavily on cleaning solutions for your parts, order-nowmetals, or materials. Many industrial products require normal or simplified custom cleaning and degreasing services, though some products require the use of custom blended degreasers and cleaning agents in order to function as needed. Finding a business whose industrial cleaning operations offer custom blending could prove very complicated. In short, the use of custom blended degreasers and cleaning agents involved the formulation of multiple degreasing and cleaning agents into one effective formula. If this concept sounds as if it is a cumbersome solution to provide, that is because custom blending involves many different moving parts, and is very complex. If your industrial business has industrial products that need custom blending solutions, it is critical that you select a company that can perfectly blend degreasers and cleaning agents that are tailored to your business needs.

Ecolink is the best solution when trying to choose a company that can provide the custom blending of degreasers and cleaning agents for industrial products. When in the need of custom blending solutions for your industrial products, Ecolink is the most trusted and accomplished authority on this type of specialized service. When researching the companies that can provide custom blending services, you will see that Ecolink holds the knowledge and experience needed to help your business with this particular form of application. Ecolink boasts unmatched chemical industry sector expertise, due to its constant success involving more than twenty-five years of custom cleaning implementation services. Some of the notable industries where Ecolink has proven its worth include manufacturing companies, aerospace, military, high-tech businesses, and other industries where critical cleaning processes is the constant standard.

Another wonderful benefit to taking your company’s custom blending needs for industrial products to Ecolink is the chemical and technical consulting you will receive, which is offered to all clients for free. Need help, assistance, or expert guidance on how to incorporate safe degreaser and cleaning agents into the fold, or what type of degreasing or cleaning solvent is most vital for your industrial products? Ecolink will lend its expert advice to any questions, concerns, or observations you have regarding what is optimal for your degreasing and cleaning needs.

Do not delay in contacting Ecolink, as the company can start assisting you immediately with your custom blending needs. Ecolink provides distinguished support over its competitors regarding the services offered when your business become a client. Ecolink always serves the best interests of their clients, along with providing the best safety measures for the environment. Ecolink can help you with custom blending solutions and provide the essential degreasers and cleaning agents to obtain ultimate satisfaction. Ecolink is the best source for custom blended degreasers and cleaning agents.