| ELECTRON Environmentally Preferred Dielectric Solvent | Electrical maintenance,spray & wipe,parts washers,vehicle maintenance. | - Excellent solvency
- Fully evaporative
- High dielectric strength
- Non hazardous(per EPA and OSHA definitions)
| 147° F TCC | 810 gm/l |
| NAVSOLVE Low VOC Degreasing Solvent | spray & wipe,parts washer,immersion tank | - Excellent solvency for a wide range of soils
- Controlled Evaporation
- Leaves no residue
- Low odor
- Low VOC
- Meets MIL-PRF-32295A Type II
| 141° F TCC | <25gm/l |
| NEW II Environmentally Preferred Parts Cleaner | Meets MIL PRF-680A Type II, parts washers, vehicle maintenance, spray & wipe. Also approved for use in Nuclear power generation facilities. | - Low odor
- Moderate dry time
- Good solvency
- Affordable
| 145° F TCC | 777 gm/l |
| PARTS KLEEN PLUS – Environmentally Preferred Parts Cleaner | Use undiluted. PARTS KLEEN PLUS works very well in a drum mounted parts washer or any immersion tank. (Not for use in high pressure enclosed cabinets.) You may also spray or wipePARTS KLEEN PLUS on a surface to be cleaned. Oil, dirt and carbon will flow off surface. If additional cleaning is required, re-apply and agitate with rag or brush. To speed evaporation, use compressed air or wipe with a dry rag. | - Mild Odor
- Fully evaporative, leaves no residue
- Not classified as an ignitable hazardous waste
- High flashpoint
| 145° F (63°C) | 821 grams/liter |
| PARTS KLEEN II – Environmentally Preferred Parts Cleaner | Use undiluted. PARTS KLEEN II works very well in a drum mounted parts washer or any immersion tank. (Not for use in high pressure enclosed cabinets.) You may also spray or wipePARTS KLEEN II on a surface to be cleaned. Oil, dirt and carbon will flow off surface. If additional cleaning is required, re-apply and agitate with rag or brush. To speed evaporation, use compressed air or wipe with a dry rag. | - Near Odorless
- Contains no water
- Fully evaporative, leaves no residue
- No hazardous ingredients as defined by the EPA
- Conforms to numerous corrosion test requirements
- High flashpoint
| 145° F (63°C) | 766 gm/L |
| POSITRON Ultra-High Purity Dielectric Solvent | Hand wipe,aerosol cleaning,electrical maintenance,dip tank. | - Fast drying
- Leaves no residue
- Low odor
- Many OEM approvals
- Non hazardous (EPA and OSHA definitions)
| 142° F TCC | 803 gm/l |
| PUROGEN High Purityd-Limonene Solvent | High performance solvent, critical cleaning applications. | - Very high solvency
- Biodegradable
- Affordable
| 120° F TCC | 699 gm/l |
| QED Quick Dry Critical Handwipe Solvent | Critical handwipe.Final cleaning.Pre-bond, pre-paint cleanup. | - Fast drying
- < 5 ppm NVR
- Virtually odorless
- Included in Mil-specs
- No reportable ingredients
| 105° F TCC | 750 gm/l |
| QED-T Quick Dry Handwipe Solvent plus Terpene | spray and wipe, parts washers, general maintenance cleaning | - Fast drying
- Leaves no residue
- Mild odor
- High solvency
| 104° F | 775 gm/l |
PURITY
Ultra-Low Residue Hand Wipe Cleaner | Aggressive soil removal.Meets many MIL and AIR cleaning specs. | - Effective on a wide range of soils
- No reportable ingredients
| 120° F TCC | 840 gm/l |
| VG 151 Aerospace Adhesive Remover | Removes adhesive, grease, tape and many other soils.Perfect for vertical surfaces.Pours as a liquid, forms a gel when sprayed. | - Non toxic
- Easy to use, saves on labor
- No hazardous ingredients
| 105° F TCC | 790 gm/l |
| VORTEX Maximum Performance Organic Solvent | Heavy soil removal.Flux removal.Pre-clean before steam or pressure wash. | - Excellent on tough soils
- No petroleum distillates
- Water rinsable
- No reportable ingredients
| 119° F TCC | 797 gm/l |
