Degreaser Spray: Tips for Choosing a Cost Effective Degreaser

/in /by

aerosol-solvent-degreasersDue to its broad spectrum of application and excellent cleaning power, eco friendly degreaser spray is one of the most commonly used cleaning solutions at companies and organizations around the globe. Due to the high volume of use the product receives, many users are motivated to find cost effective ways to purchase and deploy the product. If your company or organization is in the same boat, read these tips for choosing a cost effective degreaser spray.

Purchase in Bulk Orders –  Shop Aerosols Here
If you know that an eco friendly degreaser spray will play a permanent role in your cleaning operations, purchasing the product in bulk is good way to cut down on cost per unit. If you need degreaser spray in aerosol form, you may have no choice but to purchase it in aerosol cans. However, if you use degreaser in a liquid form that is placed inside pump action spray bottles, purchasing bulk orders of the liquid solution is a great way to reduce long-term expenditures.

Choose a Residue-Free Formulation
Degreasers that deposit residue can cause equipment to require degreasing more frequently than degreasers that are residue-free. This is because the residue can attract dirt and grime to parts that have been degreased. Removing grease with degreaser spray, and then removing degreaser residue with another cleaning solution, is cost ineffective in two ways: It essentially requires double the work, and it requires spending additional money on a residue remover.

Choose a Highly Evaporative Formulation
Degreaser that has a low evaporation rate often produces a significant amount of waste degreaser that ends up in the waste trap. Consequently, this type of spray drives up waste removal costs by requiring the trap to be emptied more often than it would be if a highly evaporative degreaser were used. Using a degreaser that has a high rate of evaporation can significantly reduce waste disposal costs, especially when a large volume of the cleaner is used.

Need to Save Money on Degreaser Spray?
If your company or organization needs to reduce its budget for purchasing eco friendly degreaser spray, Ecolink can supply solutions that help you do it. We offer a wide selection of degreasers that can be purchased in concentrated form and bulk orders, leave no residue, and have a high rate of evaporation. If we don’t have a readymade product that meets your needs, we will produce a custom product that addresses your unique set of cleaning requirements.

For more information, call us at (800) 563-1305, or fill out the contact form on our website.

Aircraft Degreasers: What Essential Characteristics Should They Exhibit?

/in /by

Aircraft degreasing operations are often performed expeditiously. A plane quickly pulls into the hangar to have aircraft degreasers applied to the engine, and then exits the hanger to resume its flight schedule. This scenario calls for aircraft degreasers that have special characteristics that make them ideal for fast, thorough degreasing operations that are performed on jet engines.

High Flashpoint or No Flashpoint
Because the engines of jet planes may be degreased while they are still hot, and even while certain engine parts remain “electrified” from steady use, it is important to choose aircraft degreasers that have an exceptionally high flash point or no flash point at all. Using such solutions can prevent injuries to workers and preserve ultra expensive jet engines from fires.

No Moisture Condensation
To protect non-stainless steel parts in the engine compartment against oxidation, aircraft degreasers that feature no moisture condensation should be used. For example, a dielectric degreaser that dries quickly instead of dripping dry would be an ideal option. The less wetness an airplane engine experiences, the longer its parts can be expected to remain in service.

No Residual Cleaner Left on Parts
Cleaner residue left on engine parts essentially sabotages the cleaning operation. Instead of repelling dirt and grime, the residue can actually increase the rate at which soils collect on the engine’s various parts. It is similar to mopping a kitchen floor with a cleaner that leaves behind residue; the floor tends to get dirtier faster than it would if no surface residue were present.

Non-Toxic Cleaning Formulation
As long as the degreaser is non-corrosive, its toxicity generally isn’t a problem for the engine that is cleaned. However, toxicity can have a major impact on a company and its workers. A special ventilation system and high-level personal protective equipment (PPE) would be necessary expenses. Without them, workers could acquire chronic health problems that lead to costly injury settlements, high-end workers compensation payouts, and loss of productivity.

Aggressive Cleaning Action
When aircraft degreasing applications must have a quick turnaround time, it is important to use a degreaser that has an aggressive cleaning action. In the minds of many, aggressive cleaning action is still associated with the use of toxic degreasers. However, special technology that can formulate highly aggressive degreasers that have a non-toxic profile is now available to all.

Contact Us Today
At Ecolink, we specialize in providing aircraft degreases that are specially designed for the application, as well as degreasers for various other types of degreasing applications. If you are looking for a specific type of solution that we do not have in our inventory, our experienced team of chemists can custom create the solution you need in almost any quantity in which you need it.

To learn more about our aircraft degreasers, or for assistance choosing the right product, call us today at (800) 563-1305, or fill out the contact form located on our website. We look forward to supplying you with a solution that meets all of your aircraft degreasing needs, and then some!

Choosing a Degreaser for a Concrete Floor: What Are Your Options?

/in /by

Concrete flooring is one of the most popular types of flooring for indoor and outdoor industrial areas. Consequently, a large market has developed around concrete cleaners, of which there are practically too many brands to count. However, most brands of degreaser for concrete floors can be organized into four distinct categories: pH-neutral, acidic, alkaline, and enzymatic.

If you need help choosing a degreaser for a concrete floor, call Ecolink at (800) 563-1305 to receive professional assistance. In addition to providing pre-designed solutions for cleaning concrete floors, we can also supply customized concrete floor cleaning solutions that are formulated to address a unique set of cleaning needs, and do so at a highly competitive price.

pH-Neutral Cleaning Solutions
These types cleaners are rather mild and are typically used to clean concrete floors that have no embedded dirt or grime, particularly floors that are well-sealed. Generally inexpensive and having a good safety profile, pH-neutral solutions are a good option for everyday concrete floor cleaning operations, especially janitorial maintenance of concrete flooring in high traffic areas.

Acidic Cleaning Solutions
This class of cleaners is more stringent than ph-neutral solutions and are typically applied to remove stains, dirt, and contamination that exhibit solubility in the presence of common acid. The most common application for the solutions is the removal of efflorescence — an insoluble, metallic salt that looks like a white powder or a crystalline residue when it accretes on concrete.

Alkaline Cleaning Solutions
These types of cleaners are commonly referred to as “concrete degreasers”, as they are generally used to remove oil and grease residues from concrete. The alkalinity of these cleaners emulsifies oily residues, so they can be easily mopped up or washed away with a water sprayer. An alkaline solution is perfect for cleaning the greasy, concrete floors in auto mechanic garages.

Enzymatic Cleaning Solutions
This class of cleaners uses an enzymatic/bacterial formulation to target specific types of soils, especially stains that are starch-based, hydrocarbon-based, and protein-based. Consequently, they are often used to remove odorous stains from concrete bathroom floors. Enzymatic solutions are popular among companies that want their cleaning solutions to be as green as possible, and don’t mind investing a bit of extra money to acquire an enzymatic solution.

Contact Us Today
If you are in the market for a degreaser for a concrete floor, the product you need is largely determined by the characteristics of the concrete, including finishing procedures that have been applied to its surface. Choosing the wrong degreaser for a concrete floor can fail to provide the right cleaning power. Worse yet, it could deface the concrete and make it expensive to restore.

For these reasons, Ecolink helps companies choose the right type of degreasing solutions for their concrete floors. If you need assistance selecting a degreaser for a concrete floor, at (800) 563-1305 to schedule a free consultation, or fill out the contact form on our website. Our experienced team of chemists are ready to supply you with the best solution for your needs!

 

Degreasing Machine: Special Formulated Solvents Have Two Important Benefits

/in /by

If you use a degreasing machine to clean parts in a production environment, then the cleaner utilized to remove contaminants is just as important as the machine itself. Degreasing machines come in several forms to offer an effective, efficient range of choices for removing contaminants. Whether using an immersion washer a vapor washer, the chemicals used to do the job pose certain risks, which must be addressed to protect workers and the environment.

Certain solvents are not the best choice as they release harmful compounds during the evaporation process. At the same time, the wrong cleaner will deliver less than desirable results. Any business using a degreasing machine needs the right cleaner to remove unwanted contaminants and a specially formulated option offers the chance to reduce exposure to harmful byproducts of the process.

Understanding Different Approaches
Solvent-based degreasing machines have the highest risk during use because they emit volatile organic compounds; however, they are often the most effective for several applications. These machines typically use a petroleum, chlorine, or alcohol based solvent for dissolving contaminants residing on the part. The solvent is applied to the part either by spraying, brushing or wiping to remove contaminants such as:

  • Oil
  • Grease
  • Dirt
  • Loose Particles
  • Other Contaminants

Degreasing machines are used to keep surfaces clean during the production processes in numerous industries. Spraying is a common cold solvent application on small maintenance jobs or to prepare a part for further cleaning. Immersion into an agitation tank is a suitable choice when mass contaminant removal is needed and common in numerous manufacturing facilities. Degreasing machines simply make it more feasible to remove contaminants from many parts at a time and support the manufacturing process. These methods produce fewer emissions than vapor machines, require less venting, and are generally safer.

Why Have a Cleaner Specially Formulated?
Most facilities require degreasing machines to maintain quality and the agents used for this process are often extremely harmful. Even though environmentally safe options are available, they sometimes do not provide the desired results. Having a unique solvent formulated for use in current degreasing machines ensures that the chemicals utilized during these processes are less harmful and equally effective. Solvent substitution is an option for reducing VOC emissions as well as for finding an alternative to solvents on the verge of being restricted or even banned. A custom solvent can have these among other qualities:

  • Little to No Volatile Organic Compounds (VOCs)
  • No Hazardous Air Pollutants (HAPs)
  • Fast Drying Qualities
  • Non-Flammable
  • Non Ozone Depleting

A specially formulated cleaner in many cases also offers better results than the traditional choices. At Ecolink, we offer a large variety of solvent substitutions for degreasing machines that not only help in this conversion but also provide an environmentally conscious option for the same cleaning results. We also are able to create a custom solution to aid in achieving the right balance of performance, cost efficiency, and spec conformance without jeopardizing health or safety. Contact us today to see how we are able to blend, label, and package the solution you need for effective removal without the dangers of traditional degreasing machine formulas.

Degreasers for Industrial Application

/in /by

As it pertains to industrial cleaning and degreasing needs, degreasers must be powerful solvents that can handle ridding numerous different types of manufactured parts, components, and raw materials of the myriad types of contaminants and damaging particles. Hazardous substances that can wreak havoc on industrial parts include paint, grime, grease, oil, lubricants, corrosion, dirt, dust, and sticky films, among many others. An industrial part could be littered with any of the previously mentioned contaminants, possibly any number of them at once. Therefore, an industrial business must be able to trust that the industrial grade degreaser application will completely rid its manufactured items of all the contaminants found on the product. Some industrial businesses that must trust that its degreasers is one hundred percent effectively removing any and all contaminants from its specialized parts include aerospace and aircraft businesses, automotive industries, power plants, paint and printing companies, electronics businesses, and the military. The following information will mention and describe a few of the most trusted kinds of degreasers that have been successful achieving a complete clean for industrial applications:

  • Citrus Degreasers – the main ingredients in this eco friendly, green alternative degreaser is orange and corn, and has proven to efficiently clean all types of industrial products, no matter how littered with contaminants the product is.
  • Chemical Degreasers – these types of degreasers are the most popularly used by industrial businesses, but due to the harmful chemical found in many of the chemical degreasers, there is a push by federal regulatory agencies to stop its usage. However, companies like Ecolink have begun putting in place eco friendly, green alternative chemical degreasers that will clean as effectively as traditional chemical cleaners and degreasers, but without the dangerous chemical used in previous solvents.
  • Heavy Duty Degreasers – these degreasers are designed with specialized solvents in order to remove what are considered the toughest residues and stains found on manufactured items and raw materials, such as carbon stains, resins, and certain oils.
  • Natural Degreasers – these degreasers are reserved more for home use, but are still considered a very efficient contaminant reducing cleaning method. These degreasers are biodegradable, and are almost always developed with safe chemicals due to its everyday household use.

Keep in mind that certain specifications are required to consider a degreaser for industrial applications. These include the pH value of the degreaser, the kinds of ingredients used to form the degreaser, the total chemical composition of the degreaser, total duration of storage capability, viscosity content, as well as the minimum temperature at which the degreaser can be used. Once you find the right degreaser for your industrial application, your business should double check that the following are achieved:

  1. Complete and utter removal of all insoluble substances
  2. Absolutely no harm will come to workers and employees using the degreaser
  3. Zero ozone depleting chemical are present
  4. There are no corrosive elements to the degreaser
  5. High performance of the degreaser is a mainstay

Shop industrial degreasers online here.