This product is virtually odorless and biodegrades at a moderate rate and will not persist nor disturb the working environment. Exxon Isopar G was designed to evaporate fast, which makes it the ideal choice for self-evaporable formulations such as vanishing oils/evanescent oils. With Exxon Isopar G, you don’t have to worry about volatility chronic aquatic toxicity. It also enables very low viscosity formulations, which permits fast and uniform spreading on metal parts.

Benefits

  • Virtually odorless with aromatic content less than 0.01%
  • High chemical and thermal stability
  • Improved working environment due to it being a low odor solvent
  • Faster-drying evaporate formulation
  • Volatility chronic aquatic toxicity isn’t expected

Applications

Industrial, professional and consumer applications as metalworking in the manufacture of process solvent and in formulations for agricultural chemical formulations.

Physical Properties 

Typical physical properties are listed in the table below. Actual properties may vary from lot to lot.

Typical Properties Typical Method Typical Value
Kauri-butanol value  ASTM D-1133 27
Aniline Point, °C (°F) 83 °C, (173 °F)
Flash Point, TCC, °C (°F) ASTM D-56 41 °C, (106 °F)
Distillation, IBP °C (°F) ASTM D-86 160 °C, (320 °F)
Distillation, DP °C (°F) ASTM D-86 176 °C, (349 °F)
Specific Gravity, @ 15.6 °C (60 °F) ASTM D-1250 0.75
Saturates 100
Aromatics <0.01
Acids None
Chlorides <1
Nitrogen <1
Peroxides Trace
Sulfur 1
Surface tension, dynes/cm @25 °C (77 °F) ASTM D-971 23.8
Interfacial tension, @ 25 °C (77 °F) 51.6
Demulsibility Excellent

 

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *