Parts Kleen 680-3

Environmentally Preferred Parts Cleaner

Conforms to Mil PRF-680C, Type III

Product Data Sheet

Safety Data Sheet

Description
PARTS KLEEN 680-3 Environmentally Preferred Parts Cleaner is an exceptional solvent degreaser formulated without chlorinated solvents or other hazardous ingredients. The base for PARTS KLEEN 680-3 is a unique high-grade hydrocarbon that provides its strength, has very low odor and has a high flash point, allowing safe use on all types of mechanical apparatus. With its high flash point, PARTS KLEEN 680-3 provides an unprecedented degree of user safety.

PARTS KLEEN 680-3 Environmentally Preferred Parts Cleaner is strong enough to remove grease, fuel oil, carbon and organic resins yet safe on most plastic and rubber surfaces. Unlike other solvents, PARTS KLEEN 680-3 can be used without extensive protective equipment. Common sense chemical precautions required. (See SDS).

Benefits

• Very Low Odor
• Contains no water
• Fully evaporative, leaves no residue
• No hazardous ingredients as defined by the EPA
• Meets all requirements to MIL-PRF-680C, Type III
• Conforms to numerous corrosion test requirements
• High flashpoint

Applications
Use undiluted. PARTS KLEEN 680-3 works very well in a drum mounted parts washer or any immersion tank. (Not for use in high pressure enclosed cabinets.) You may also spray or wipe PARTS KLEEN 680-3 on a surface to be cleaned. Oil, dirt and carbon will flow off surface. If additional cleaning is required, re-apply and agitate with rag or brush. To speed evaporation, use compressed air or wipe with a dry rag.

Key Physical Characteristics

Safety and Handling Precautions
Always use with adequate ventilation. Rubber gloves are recommended. Treat as combustible liquid. Place rags in a metal sealable container after use to avoid possible spontaneous combustion. Keep container closed. Avoid excessive contact with fumes or liquid. Please read SDS prior to use.

Packaging