NAVSOLVE® Low VOC Degreasing Solvent

Environmentally Preferred Low VOC Solvent

Description

NAVSOLVE® is a low VOC (<25 gm/l) degreaser designed to replace P-D-680, Stoddard Solvent, and MIL-PRF-680 parts washer solvents.  It conforms to MIL-PRF-32295A Type II and MIL-PRF-32597.  NAVSOLVE® is safe for use on ferrous and non-ferrous metals.

NAVSOLVE® is strong enough to remove grease, fuel oil, carbon and organic resins yet safe on most painted surfaces.

Benefits

• Excellent solvency for a wide range of soils
• Controlled evaporation
• Leaves no residue
• Low odor
• Low VOC – meets stringent air quality standards and is certified to the South Coast Air Quality Clean Air Solvent Certification program.
• Meets MIL-PRF-32295A Type II and MIL-PRF-32597

Applications

Use undiluted.  NAVSOLVE® works very well in a drum mounted parts washer or any immersion tank. (Not for use in high pressure enclosed cabinets.) You may also spray or wipe NAVSOLVE® on a surface to be cleaned.  Oil, dirt and carbon will flow off surface. If additional cleaning is required, re-apply and agitate with rag or brush.  To speed evaporation, use compressed air or wipe with a dry rag.

Key Physical Characteristics

(N/A = Not Applicable N/E = Not Established)

Safety and Handling Precautions

NAVSOLVE® is a combustible material that should never be used around open flames, (welding torches, for example). Always use with adequate ventilation. Rubber gloves are recommended.  Place rags in a metal sealable container after use.  Keep container closed. Avoid excessive contact with fumes or liquid.  Consult MSDS.

Packaging